Amorphous selenium direct detection CMOS digital x-ray imager with 25 micron pixel pitch

Christopher C. Scott, Shiva Abbaszadeh, Sina Ghanbarzadeh, G. Allan, Michael G. Farrier, Ian A. Cunningham, Karim S. Karim

Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE · 2014 · 16 citations · 11 references

Concepts

Abstract

ABSTRACT We have developed a high resolution amorphous selenium (a-Se) direct detection imager using a large-areacompatible back-end fabrication process on top of a CMOS active pixel sensor having 25 micron pixel pitch.Integration of a-Se with CMOS technology requires overcoming CMOS/a-Se interfacial strain, which initiatesnucleation of crystalline selenium and results in high detector dark currents. A CMOS-compatible polyimidebu er layer was used to planarize the backplane and provide a low stress and thermally stable surface for a-Se.The bu er layer inhibits crystallization and provides detector stability that is not only a performance factor butalso critical for favorable long term cost-bene t considerations in the application of CMOS digital x-ray imagersin medical practice. The detector structure is comprised of a polyimide (PI) bu er layer, the a-Se layer, and agold (Au) top electrode. The PI layer is applied by spin-coating and is patterned using dry etching to open thebackplane bond pads for wire bonding. Thermal evaporation is used to deposit the a-Se and Au layers, and thedetector is operated in hole collection mode (i.e. a positive bias on the Au top electrode).High resolution a-Se diagnostic systems typically use 70 to 100  m pixel pitch and have a pre-samplingmodulation transfer function (MTF) that is signi cantly limited by the pixel aperture. Our results con rm that,for a densely integrated 25  m pixel pitch CMOS array, the MTF approaches the fundamental material limit,i.e. where the MTF begins to be limited by the a-Se material properties and not the pixel aperture. Preliminaryimages demonstrating high spatial resolution have been obtained from a rst prototype imager.Keywords: x-ray imaging, high spatial resolution, amorphous selenium, CMOS, CMOS-selenium, array pro-cessing, direct conversion, at panel imaging

References

11