Applied Spectroscopy · 2003 · 115 citations · 11 references
EngineeringAutomotive EngineeringInstrumentationSpectroscopic AnalysisSpectroscopyCombustion In EnginesEmission SpectroscopyEngine InstrumentationEngine TestingIgnitionLaser SpectroscopyEquivalence RatioExhaust Gas Composition MeasurementLaser-induced BreakdownLaser-induced Breakdown SpectroscopyLaser-induced Emission SpectroscopySeparate CalibrationSingle ShotSpectral Features
Laser-induced breakdown spectroscopy (LIBS) has been used to measure the equivalence ratio of a spark-ignited engine in a laboratory setting. Spectral features of C (711.3 nm), O (776.6 nm), N (746.3 and 743.8 nm), and CN (broad emission 707-734 nm) were used to quantify the equivalence ratio over a range from phi = 0.8 to phi = 1.2. The C/N and C/O peak ratios were found to be successful measurement metrics, compared with a standard exhaust gas oxygen analyzer, for averaged measurements. Some variation in the measurements was observed as a function of engine load. Single-shot data based on a CN/air peak ratio were evaluated using a separate calibration from averaged measurements, and the average of the single-shot data was found to agree well with the exhaust gas oxygen analyzer. The scatter in the single-shot data was substantially higher at lower equivalence ratios. The measurements including the CN peak were slightly sensitive to load, possibly due to pressure changes in the sample as the load increases, or possibly due to changes in the particle size distribution in the gas stream.
11
In uence of ambient conditions on the laser air spark
Ş. Yalçın, David R. Crosley, Gregory P. Smith et al. · Applied Physics B · 1999 · 323 citations
Matsuhei Noda, Yoshihiro Deguchi, Seiji IWASAKI et al. · Spectrochimica Acta Part B Atomic Spectroscopy · 2002 · 117 citations
Natural Sciences, Materials Engineering, Materials Science +12