Materials Science and Technology · 2014 · 31 citations · 21 references
EngineeringMaterials EngineeringMaterials ScienceMaterials ProcessingMechanical Behavior Of MaterialsMetallurgyAlloysImpact BehaviorImpact MechanicsMartensitic TransformationsSteel MaterialsThermomechanical ProcessingAustenite TransformationBainite TransformationBainitic SteelsImpact EnergyIsothermal Martensitic TransformationSteel Heat TreatmentThermomechanical Treatment Of SteelsToughness
To improve impact toughness of the nanostructured bainite–austenite steel, a heat treatment operation was developed to divide prior austenite grains by plates of martensite directly before isothermal transformation. In the investigation, nanostructured steel containing 0·55C, 1·95Mn, 1·82Si, 1·29Cr and 0·72Mo was used. It was found that a partial transformation to martensite achieved by cooling to 160°C followed by direct isothermal transformation to bainite at 225°C was the most promising treatment to improve Charpy impact energy of the investigated steel. For each testing temperature: ambient, 0, −20, −40 and −60°C, the specimens subjected to the developed treatment showed a higher averaged impact energy than the specimens subjected to the standard treatment.
21
Carbon partitioning into austenite after martensite transformation
John G. Speer, David K. Matlock, Bruno C. De Cooman et al. · Acta Materialia · 2003 · 1.6K citations
Natural Sciences, Materials Engineering, Materials Science +12
Very strong low temperature bainite
Francisca G. Caballero, H. K. D. H. Bhadeshia, K. J. A. Mawella et al. · Materials Science and Technology · 2002 · 536 citations
Natural Sciences, Materials Engineering, Materials Science +17