Journal of Aircraft · 2011 · 15 citations · 10 references
EngineeringAerospace EngineeringMechanical EngineeringFinite Element AnalysisStructural AnalysisStructural DynamicsAeroelastic Response PredictionFinite Element DynamicsModal AnalysisStructural Finite Element AnalysisStructural SimulationVibration AnalysisDynamic Structural AnalysisFinite Element ModelingFlutterFlutter AnalysisFlutter Margin OptimizationStructural Dynamic AnalysisStructural Dynamics ModelingStructural Dynamics Response
Tuning a finite element model using measured data to minimize the model uncertainties is a challenging task in the area of structural dynamics. A test-validated finite element model can provide a reliable flutter analysis to define the flutter placard speed to which the aircraft can be flown before flight flutter testing. Minimizing the difference between numerical and experimental results is a type of optimization problem. Through the use of the NASA Dryden Flight Research Center's multidisciplinary design, analysis, and optimization tool to optimize the objective function and constraints, the mass properties, natural frequencies, and mode shapes are matched to the target data and the mass matrix orthogonality is retained. The approach in this study has been applied to minimize the model uncertainties for the structural dynamic model of the Aerostructures Test Wing, which was designed, built, and tested at the NASA Dryden Flight Research Center. A 25% change in flutter speed has been shown after reducing the uncertainties. Therefore, without reducing the uncertainties, 40% of the flutter margin (15% MIL-SPEC requirement + 25% modeling uncertainties) would be needed for the safety of flight test.
10
Proceedings of the 15th International Modal Analysis Conference
Proc. Spie Vol. · 1997 · 681 citations
Paul Charbonneau, Barry Knapp · Open MIND · 1995 · 75 citations · Full text
Test Requirements for Launch, Upper-Stage, and Space Vehicles
E. Perl · 2006 · 65 citations
Updating the Finite Element Model of the Aerostructures Test Wing Using Ground Vibration Test Data
Shun-Fat Lung, Chan-gi Pak · 50th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference · 2009 · 18 citations · Full text
Engineering, Aerospace Engineering, Mechanical Engineering +17