Applied Physics Letters · 2005 · 23 citations · 15 references
EngineeringElectrical EngineeringOpticsOptoelectronicsRadiation DetectionDetector TechnologyOptical DetectorsPhotodetectorsPhotoelectron SpectroscopyRadiation DetectorsUltraviolet DetectorsDetector CharacterizationDiamond DetectorsElectrical Measurement SystemsPhotoconductive DetectorsPhotocurrent GenerationSpectral ResponsivityUltraviolet PhotodetectorsVacuum Ultraviolet Detectors
Spectral responsivities of photoconductive diamond detectors were measured based on a standard detector calibrated by a rare-gas ionization chamber in the wavelength range from 10to60nm using synchrotron radiation. The photoemission current component was measured separately from the internally generated photocurrent component by using two electrical measurement configurations and by changing the polarity of the applied voltage to the detector. The photoemission current contribution to the total output current was not negligible but dominant in wavelengths longer than 40nm. On the other hand, the internal photocurrent played a major role in wavelengths shorter than approximately 25nm.
15
Secondary electron emission studies
A. Shih, J. E. Yater, C. Hor et al. · Applied Surface Science · 1997 · 184 citations
D. R. Kania, M. I. Landstrass, M. A. Plano et al. · Diamond and Related Materials · 1993 · 182 citations
A 600-MeV ETL Electron Storage Ring
T. Tomimasu, Toshihiko Noguchi, Shigeo Sugiyama et al. · IEEE Transactions on Nuclear Science · 1983 · 65 citations