Environmental Technology · 2000 · 17 citations · 0 references
EngineeringEnvironmental EngineeringSoil SciencesEnvironmental RemediationSoil ChemistrySoil RemediationExtraction TechniquesOrganic Contaminant RemovalSoil PollutionSolvent ExtractionSupercritical Fluid ExtractionThermal DesorptionContaminated SoilExtraction Of Organic CompoundsExtraction SolventsSuperfund RemediationSuperfund SitesTemperature Effects On Extraction
Bench-scale supercritical fluid extraction (SFE) studies were performed on soil samples obtained from a Superfund site that is contaminated with high levels of p,p′-DDT, p,p′-DDD, p,p′-DDE, toxaphene and hexachlorocyclohexane. The effectiveness of supercritical fluid extraction was assessed using pure and modified CO2 as a solvent over a wide range of conditions. A 30-minute extraction at 30 MPa and 80°C was able to remove more than 98% of the contaminants and reduce the contaminated volume by a factor of 500. Solvent extraction and thermal desorption treatability studies were conducted on soil samples obtained from the same site to compare their performance with that of supercritical fluid extraction. A six-stage solvent extraction using methanol achieved 96 to 98% removal of the four contaminants, except for DDE which existed at low initial concentrations. The contaminated volume reduction was 40 to 50 times. Low temperature thermal desorption employed at 350°C for 30 minutes removed more than 98% for each contaminant except DDE. However, solvent extraction includes costly solvent regeneration and recycling steps, and thermal desorption generates air pollutants that require expensive particulate removal and gas stream cleaning. This study attempted to show that SFE can be as effective as other emerging technologies in removing contaminants from soils, and can reduce the contaminated volume by a large factor.