Advanced Engineering Materials · 2001 · 36 citations · 0 references
Natural SciencesMaterials EngineeringMaterials ScienceCeramic MaterialsCeramicsMechanical Behavior Of MaterialsCeramic CompositesCeramic Matrix CompositesComposite MaterialsFiber-reinforced CompositesFracture ToughnessStructural CeramicsBrittle FailureFiber-matrix InteractionFiber-reinforced Ceramic CompositesFiber-reinforced CeramicsFrictionHysteresisInterface FrictionInterfacial Characterization
Fiber reinforced ceramics are ready to be used in wide spread applications due to their unique combination of typical ceramic properties and enhanced fracture toughness. This outstanding combination is only achievable if appropriate fiber–matrix interfaces are ascertained. The interfacial state can favourably be measured by the fiber push-in test. This method is reviewed in this paper and further elaborated in order to derive quantitative prediction of the composite performance from fiber–matrix interface bonding and friction data. The problem of overestimating the frictional forces due to the Poisson effect is overcome by means of analysing the hysteresis area from two load–unload-cycles. Significant dependence of interface friction on fiber diameter is detected as it is predicted taking into account the effect of fiber roughness on the interface clamping stress. A statistical procedure is applied to determine the critical debond stress which is the upper limit to prevent brittle fiber failure.