Effect of Residual Gas on Water Adsorption Dynamics Under Typical Conditions of an Adsorption Chiller

Ivan S. Glaznev, Daniil S. Ovoshchnikov, Yu. I. Aristov

Heat Transfer Engineering · 2010 · 27 citations · 16 references

Concepts

Abstract

Abstract In this article the effect of a non-adsorbable gas (air) on kinetics of water adsorption on loose grains was studied for three adsorbents promising for adsorption chilling: SWS-1L (silica KSK modified by calcium chloride), silica Fuji type RD, and FAM-Z02. The experimental conditions were fixed similar to real operating conditions during an isobaric adsorption stage of the basic cycle of an adsorption chiller (AC). Reduction of the adsorption rate was revealed even at a partial pressure of residual air as low as 0.06 mbar. Dependence of the characteristic adsorption time on air partial pressure was found to be linear for partial pressures greater than 0.4 mbar, with the slope depending on the adsorbent nature. Desorption stage was less affected by the residual air. Specific power released in an AC evaporator during the adsorption process was estimated as a function of the partial pressure of residual air, and recommendations how to improve cooling performance are made. Acknowledgments The authors thank the Russian Foundation for Basic Researches (projects 08-08-00808 and 09-08-90405) for partial financial support, and Dr. M. Ito for providing us with a Fuji silica type RD.

References

16