Mini-DST Applications for Shell Deepwater Malaysia

Saifon Daungkaew, Jack Harfoushian, B. Cheong, Olumide Akinsanmi, Jingjie Yeo, Serge Toulekima

Asia Pacific Oil and Gas Conference and Exhibition · 2007 · 31 citations · 13 references

Concepts

Abstract

Abstract Exploration and appraisal campaigns for deepwater environments are a continuous challenge in today's operations. Data acquisition in such environments requires reservoir information of the highest quality before expensive development plans can be put in place. New technology, real time monitoring and integrated reservoir data are essential to understand such reservoirs. Another challenge presented by thinly bedded reservoirs is the presence of vertical heterogeneity and varying layer flow properties. Wireline formation testers have been commonly used to acquire formation pressures pressure and reservoir fluid samples for a number of decades. Many hardware technologies and interpretation methods have been developed to acquire better quality reservoir information. Dual packer wireline formation testers offer an alternative an additional way to selectively straddle a section of a reservoir and provide the capability to conduct controlled local production and interference as well as to enable the capture of reservoir fluids. Formation permeability, anisotropy, skin factor, vertical connectivity and zonal productivity index are additional reservoir information that can be obtained from a mini-Drill Stem Test (mini-DST) and a Vertical Interference Test (VIT). Pressure transient analysis of a mini-DST data however in such reservoirs is challenging due to the associated uncertainties such as layer flow compartments and flowing fluid viscosity. This paper discusses the use of integrated reservoir information obtained from Downhole Fluid Analyzers (DFA), borehole images, and numerical simulation models to minimize these uncertainties. A systematic pressure transient analysis method for mini-DSTs is also introduced. Reservoir parameters obtained from mini-DSTs in thinly laminated deepwater reservoirs are then compared with other available static and dynamic reservoir information such as petrophysical data, core analysis, well tests, production logs, and single probe wireline formation tests in order to obtain accurate interpretation results of highest consistency. Field examples will be discussed which show that smaller scale pressure transient tests often have an advantage over full scale well tests testing in terms of providing detailed layer flow behavior, vertical connectivity and flow potential in thinly bedded environments. It will also be noted that the radius of investigation of a mini-DST is limited, typically within tens of feet. This paper demonstrates using field examples that reservoir boundaries can be detected when sufficient radius of investigation is achieved. In addition, the understanding of limitations and advantages will allow the proper selection of test types in order to meet specific objectives and maximize the full potential use of acquired data for field development plans in thinly laminated deepwater environments.

References

13