1c:I[419806,["/_next/static/chunks/bb923814e1f4d2e9.js","/_next/static/chunks/dd3ee9f5b7716ca6.js","/_next/static/chunks/4204a0ae82542ca8.js","/_next/static/chunks/1270dead247da766.js","/_next/static/chunks/6e1aa89a642f40be.js","/_next/static/chunks/2d7aa753e81324a8.js","/_next/static/chunks/8ffd0b71567920d8.js","/_next/static/chunks/67ea6dfd21f16c5f.js","/_next/static/chunks/24eb4379f68013fd.js","/_next/static/chunks/b8cd775ffdf935bd.js","/_next/static/chunks/983103cd9eb7b428.js","/_next/static/chunks/263f2cdcb9aa2341.js","/_next/static/chunks/294b9525248c8e5f.js"],"default"] 1d:T51b,We describe transmitter and receiver circuits for a 10-Gbps single-ended optical link in a 40-nm CMOS technology. The circuits are bonded using low-parasitic micro-solder bumps to silicon photonic devices on a 130-nm SOI platform. The transmitter drives oval resonant ring modulators with a 2-V swing and employs static thermal tuners to compensate for optical device process variations. The receiver is based on a transimpedance amplifier (TIA) with 4-kΩ gain and designed for an input power of - 15 dBm, a photodiode responsivity of 0.7 A/W, and an input extinction ratio of 6 dB. It employs a pair of interleaved clocked sense-amplifiers for voltage slicing and uses a DLL with phase adjustment for centering the clock in the data eye. Periodic calibration allows for adjustment of both voltage and timing margins. At 10 Gbps, the transmitter extinction ratio exceeds 7 dB and, excluding thermal tuning and laser power, it consumes 1.35 mW. At the same datarate, the receiver consumes 3.95 mW. On-chip PRBS generators and checkers with 2 ³¹ -1 sequences confirm operation at a BER better than 10 ^-12 .1e:T4c1,This work presents the design and performance of a 10Gbit/s transimpedance amplifier (TIA) implemented in a 40nm CMOS technology. The introduced TIA uses an inverter with active common-drain feedback (ICDF-TIA). The TIA is followed by a two-stage differential amplifier and a 50Ω differential output driver to provide an interface to the measurement setup. The optical receiver shows an optical sensitivity of −19dBm for a BER= 10 ⁻¹² . The transimpedance amplifier achieves a transimpedance gain of 47dBΩ, 8GHz bandwidth with 0.45pF total input capacitance for the photodiode, ESD protection and input PAD. The TIA occupies 0.0002mm ² whereas the complete optical receiver occupies a chip area of 0.16mm ² . The power consumption of the TIA is only 2mW and the complete chip dissipates 16mW for a 1.1V single supply voltage. The complete optical receiver has a 58dBΩ transimpedance gain and 7GHz bandwidth.

	Year	Citations

References