Open Physics · 2006 · 63 citations · 35 references
Natural SciencesMaterials EngineeringMaterials ScienceMaterials CharacterizationMaterials ChemistryThin FilmsAtomic Layer DepositionThin Film AnnealingThin-film MaterialsAnnealingPulsed Laser DepositionRutile OxidesSapphire Substrate PreparationSiliconSingle-crystal SiliconThin Oxide FilmsTitanium Oxides
Abstract The Raman spectroscopy method was used for structural characterization of TiO2 thin films prepared by atomic layer deposition (ALD) and pulsed laser deposition (PLD) on fused silica and single-crystal silicon and sapphire substrates. Using ALD, anatase thin films were grown on silica and silicon substrates at temperatures 125–425 °C. At higher deposition temperatures, mixed anatase and rutile phases grew on these substrates. Post-growth annealing resulted in anatase-to-rutile phase transitions at 750 °C in the case of pure anatase films. The films that contained chlorine residues and were amorphous in their as-grown stage transformed into anatase phase at 400 °C and retained this phase even after annealing at 900 °C. On single crystal sapphire substrates, phase-pure rutile films were obtained by ALD at 425 °C and higher temperatures without additional annealing. Thin films that predominantly contained brookite phase were grown by PLD on silica substrates using rutile as a starting material.
35
TiO2 anatase thin films as gas sensors
Hongyu Tang, K. Prasad, R. Sanjinés et al. · Sensors and Actuators B Chemical · 1995 · 409 citations
Natural Sciences, Materials Engineering, Materials Science +14
Growth of titanium dioxide thin films by atomic layer epitaxy
Mikko Ritala, Markku Leskelä, E. Nykänen et al. · Thin Solid Films · 1993 · 307 citations
Natural Sciences, Materials Engineering, Materials Science +14