Energy & Fuels · 2003 · 10 citations · 4 references
EngineeringChemical EngineeringPetroleum EngineeringCatalysisHeat TransferThermal AnalysisProduction OptimizationReactor ModelingSupercritical Fluid ExtractionAtomizationBoiling PointParametric Sensitivity AnalysisParametric TestsResidue ConversionSensitivityVaporizationVaporization Modeling
Supercritical fluid extraction and fractionation (SFEF) was used to prepare various narrow-cuts from a variety of petroleum vacuum residua. Molecular weights of SFEF narrow-cuts were used to derive the modified normal paraffin, UNIFAC group contribution model for predicting vaporization of residua. The predicted amount of residue vaporization at the feed injection point of a commercial FCC riser reactor agrees with that estimated by the residue boiling point correlation and the amount of carbonaceous matter on catalysts obtained in a field test. The predicted results show that a significant amount of residua (about 50 wt %) is not vaporized at the feed injection point of the FCC riser reactor. Parametric sensitivity tests using the UNIFAC model suggest that increasing temperature or quantity of atomization steam at the feed injection point of the FCC riser reactor has a higher impact on increasing residue vaporization than decreasing pressure. This newly developed UNIFAC model can be used as a tool for optimizing residue FCC operations.
4
Aage Fredenslund, Jürgen Gmehling, Michael L. Michelsen et al. · Industrial & Engineering Chemistry Process Design and Development · 1977 · 270 citations
Supercritical fluid extraction reveals resid properties
Keng H. Chung, Chengcheng Xu, Yue Hu et al. · Oil & gas journal/Oil and gas journal · 1997 · 47 citations