Applied Spectroscopy · 2009 · 43 citations · 37 references
Natural SciencesMaterials EngineeringMaterials ScienceNanomaterialsSpectroscopyThin FilmsMetal Oxide NanomaterialsNanomaterial CharacterizationNanoparticle CharacterizationNanoparticle InterfacesNanoscale MaterialsRaman SpectroscopyAnnealing Temperature EffectsCrystallite Size AnalysisIron Oxide NanoparticlesLaser HeatingLaser-induced HeatingMetal NanoparticlesRaman SpectraTemperature-dependent Raman Spectroscopy
This paper demonstrates the sensitivity of the Raman spectra of electrospray-deposited iron-oxide nanoparticle films to their grain size. The grain size in the films was controlled using the temperature of annealing. The position and width of the bands at approximately 225, 612, 660, and 1317 Deltacm(-1) were investigated for their sensitivity to both grain size and laser-induced heating, using 532 nm excitation. The parameter most sensitive to grain size was found to be the difference between the band position of the 660 Deltacm(-1) LO and 225 Deltacm(-1) TO bands (X660-X225). The distance between the two bands narrowed with increasing annealing temperature of the films, suggesting that, as grain size increases, these two bands become closer. The 660 Deltacm(-1) band position was very stable regardless of variation in laser power and, thus, laser-induced heating effects. The films were prepared by electrospray deposition of a commercial maghemite (gamma-Fe2O3) nanoparticle suspension onto a silicon wafer followed by post-annealing in a temperature range of 600-1000 degrees C for 15 min in an air atmosphere.
37