Color Research & Application · 1993 · 94 citations · 3 references
EngineeringBiomedical EngineeringMetrologySensorsSpectroscopyColor PerceptionDisplay TechnologiesPhotometric SystemsAccuracyColorimetric TestsHigh-precision MeasurementMeasurement AccuracyPrecisionPrecision MeasurementRadiometric Analysis
Colorimetric characterization of computer‑controlled CRT displays requires high‑precision radiometric measurements to achieve acceptable color accuracy, yet models often assume channel and spatial independence that may not hold. The study evaluated precision and accuracy requirements of photometers, colorimeters, and spectroradiometers and performed tests on four imaging systems. Analyses show that measurement accuracy is constrained by wavelength scale in spectroradiometers and filter fit in colorimeters, while precision is limited by significant‑figure count in fixed‑range devices and signal‑to‑noise for low‑luminance stimuli; display accuracy suffers from lack of channel and spatial independence, and display precision is mainly limited by electronic design and gun‑amplifier stability and load independence. © 1993 John Wiley & Sons, Inc.
Abstract The colorimetric characterization of computer‐controlled CRT displays require radiometric measurements with high precision and accuracy in order to achieve acceptable colorimetric accuracy in defining stimuli generated with this type of imaging modality. Precision and accuracy requirements for photometers, colorimeters, and spectroradiometers were evaluated. When models are used to relate digital counts defining a stimulus and resulting spectral radiant exitance, displays are assumed to exhibit channel and spatial independence. A variety of tests and the results of evaluating four imaging systems are described. From these analyses, measurement accuracy is mainly limited by wavelength scale in the case of spectro‐radiometers and filter fit in the case of colorimeters. Measurement precision is limited by the number of significant figures for fixed‐range devices and signal‐to‐noise limitations for low‐luminance stimuli. Display accuracy is limited by a lack of channel and spatial independence. Display precision is mainly limited by the electronic design of the display and the stability and load independence of the gun amplifiers. © 1993 John Wiley & Sons, Inc.
3
Calibration of a computer controlled color monitor
David H. Brainard · Color Research & Application · 1989 · 198 citations