Journal of Mass Spectrometry · 2007 · 28 citations · 7 references
EngineeringElectrical EngineeringManufacturing EngineeringQuality ControlQuality EngineeringQuality ImprovementDevice ModelingDistortion AnalysisAlpha EffectFilter DesignManufacturing Defect AnalysisManufacturing Defect Causation
Modelling techniques have previously predicted the observed behaviour of perfectly manufactured QMS mass filters. These methods are extended to examination of the behaviour of imperfect QMS filters; this examination considers the behaviour of QMS filters with one rod displaced radially inward as this is a simple manufacturing defect that arises when a rod does not fit correctly into the mounting. The results demonstrate the well known, but poorly documented property, that exchanging the connections of a poorly performing QMS device sometimes improves performance. This is shown to arise because only a displacement of a y-rod produces a large effect. The results also show that displacement of a y-rod may produce a spurious additional peak known as a precursor. More detailed investigation suggests that precursors are not separate peaks but are formed because a section of the main peak is removed causing an apparent double peak. Finally results confirm that adjustment of the voltage applied to a displaced rod can be used to significantly improve the QMS behaviour. A small change by a fraction alpha in the position of a single rod may be compensated by a change of 2 x alpha in the voltage applied to that rod.
7