Publication | Closed Access
Reactive sputtering deposition of low temperature tantalum suboxide thin films
47
Citations
21
References
1993
Year
Materials ScienceMaterials EngineeringElectrical EngineeringDielectric ConstantEngineeringDeposition SchemeOxide ElectronicsSurface ScienceApplied PhysicsThin Film DevicesThin Film Process TechnologyThin FilmsChemical DepositionChemical Vapor DepositionThin Film Processing
A relatively simple direct current sputtering deposition scheme has been employed to deposit 1000 Å tantalum oxide thin films at low temperature. At ≂190 °C substrate temperature, without further annealing, tantalum oxide films with a dielectric constant of 21–22 and a leakage current density as low as 10 nA/cm2 at 0.5 MV/cm electrical field strength (∼5 V of applied voltage) are obtained. These properties are achieved over a wide range of O2/Ar ratios when the total flow rate is kept constant. XPS measurements reveal that these films are nonstoichiometric with a composition of TaOx where x≂1.5. These low temperature, high dielectric constant thin films have potential applications as decoupling capacitors in very high speed electronic circuits and packaging.
| Year | Citations | |
|---|---|---|
Page 1
Page 1