Journal of the American Ceramic Society · 1990 · 39 citations · 8 references
Natural SciencesMaterials EngineeringMaterials ScienceCeramic MaterialsCeramicsPhysical ChemistryOxidation ReactionsSemiconductor Device MaterialsSilicon MaterialsSinteringThermal Properties Of CeramicsThermodynamics Of CeramicsOxidationOxidation MechanismsSilicon CarbideSilicon Carbide (Sic) MaterialsSilicon Carbide CeramicsSilicon OxidationThermogravimetric CurvesThermogravimetric Data Analysis
The reactions of a sintered α‐SiC with 5% H 2 /H 2 O/Ar at 1300°C were studied. Thermomchemical modeling indicates that three reaction regions are expected, depending on the initial water vapor or equivalently oxygen content of the gas stream. A high oxygen content ( P (O 2 ) > 10 −22 atm) leads to a SiO 2 formation. This generally forms as a protective film and limits consumption of the SiC (passive oxidation). An intermediate oxygen content (10 −22 atm > P (O 2 ) > 10 −26 atm) leads to SiO and CO formation. These gaseous products can lead to rapid consumption of the SiC (active oxidation). Thermogravimetric studies in this intermediate region gave reaction rates which appear to be controlled by H 2 O gas‐phase transport to the sample and reacted microstructures showed extensive grain‐boundary attack in this region. Finally, a very low oxygen content ( P (O 2 ) < 10 −26 atm) is thermochemically predicted to lead to selective removal of carbon and formation of free silicon. Experimentally low weight losses and iron silicides are observed in this region. The iron silicides are attributed to reaction of free silicon and iron impurities in the system.
8
Convective Heat and Mass Transfer
W. M. Kays, J. H. Whitelaw · Journal of Applied Mechanics · 1967 · 4K citations · Full text