Journal of Chemical Technology and Biotechnology · 1981 · 129 citations · 18 references
Natural SciencesMaterials EngineeringMaterials ScienceBiomaterialsCeramic MaterialsCeramicsBioceramicsBone TissueCalcium Phosphate BiomaterialsCalcium Phosphate MaterialsCeramic BiomaterialsAdditivesApatite Crystal ChemistryHydroxyapatitePyrolysisPyrolysis KineticsTricalcium PhosphateTricalcium Phosphate Biomaterials
Abstract Non‐stoichiometric hydroxyapatite was prepared by the hydrolysis of α‐tricalcium phosphate. The apatite was obtained as a powder and hardened with and without stirring during the hydrolysis. The apatite had a general formula, characteristic dehydration and pyrolysis behaviour similar to that of precipitated non‐stoichiometric hydroxyapatite. In addition, it exhibited some new phenomena (i.e. thermal reaction between lattice H 2 O and PO 4 3− above 473 K, formation of ESR centres above 473 K and disappearance at 873–973 K, and a slight weight loss at 873–973 K). Apatite particles were composed of aggregates of cylindrical rods or thin blades grown along the c‐axis or {100} faces of apatite structure. Hardened apatite materials with various porosities above 55% and bulk densities below 1.4 g cm −3 were obtained by using different water‐soluble additives. The strength of the hardened materials was 20–500 kg cm −2 in compression and 10–120 kg cm −2 in bending. The strengths were improved at least two to three times by impregnating the hardened materials with methyl methacrylate polymer.
18