Industrial & Engineering Chemistry Research · 2002 · 44 citations · 8 references
Natural SciencesChemical EngineeringChemistryElemental AnalysisInorganic ChemistryMetallurgyMetal SulfidesSulfur ChemistrySulfur CompoundsSulfur CyclingSulfur DioxideSulfur OxidesCoal Flue Gas DesulfurizationIn Situ X-ray DiffractionResidual SulfurSulfidationSulfur Content AnalysisSulfur RemovalX-ray Diffraction AnalysisZinc Sulfides
Zinc ferrite−silica composite powder was subjected to a series of reduction and sulfidation tests performed at mainly 450 °C in a simulated coal gas environment. In situ X-ray diffraction analyses revealed that ZnS and FeS were produced at a H 2 S concentration of 1 vol %, whereas only zinc sulfides were detected at 80 ppm. The scheme for sulfidation at 450 °C was essentially the same as that of pure zinc ferrite at 550 °C. The desulfurization sorbent containing the composite powder was subjected to pressurized thermobalance to determine the sulfur capacities of zinc and iron separately by applying high and low H 2 S concentrations for sulfidation. This method was applied to analyze the change of the zinc-related sulfur capacity of sorbent samples that experienced multiple desulfurization cycles up to 20 times. At the end of the cycles, the zinc-related sulfur capacity had fallen to about 50% of its initial value, whereas the sulfur capacity due to iron sulfidation maintained 91% of its initial value. This indicates that the residual sulfur mainly results from the production of zinc sulfate during multiple desulfurization cycles.
8