IEEE Transactions on Microwave Theory and Techniques · 2012 · 70 citations · 14 references
EngineeringElectrical EngineeringLow-power DesignMicroelectronicsMicrowave EngineeringCmos Circuit DesignHigh-frequency Semiconductor DevicesMicrowave Integrated CircuitsMillimeter-wave CommunicationsMixed-signal Integrated Circuit DesignRadio-frequency Integrated CircuitsBicmos TechnologyMillimeter-wave Integrated CircuitsNoise FigurePhase ShiftersPower ConsumptionRadio-frequency Integrated Circuit DesignRf Cmos DesignSige Bicmos Design
This paper presents a 16-element Q-band transmit/ receive phased array with high receive linearity and low power consumption. The design is based on the all-RF architecture with passive phase shifters and a 1:16 Wilkinson network. An input P <sub xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">1dB</sub> from -9 to -10 dBm and a noise figure of 10-11.5 dB at 44-46 GHz is achieved in the receive mode with a power consumption of 0.95 W. In the transmit mode, each channel has an output P <sub xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">1dB</sub> of 3-2 dBm and P <sub xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">sat</sub> of 6-4 dBm at 44-46 GHz with a power consumption of 1.16 W. The design results in a low root mean square (rms) gain error due to a high-resolution variable gain amplifier in each channel. Measurements on multiple channels show near-identical gain and phase response in both the transmit and receive mode due to the use of a symmetrical passive combiner. The measured on-chip coupling is <; -40 dB and results in insignificant additional rms and phase error.
14
M R Gavin · Physics Bulletin · 1963 · 914 citations
Dong‐Woo Kang, Jeong‐Geun Kim, Byung‐Wook Min et al. · IEEE Transactions on Microwave Theory and Techniques · 2009 · 156 citations