IIE Transactions · 1992 · 28 citations · 12 references
Public HealthInjury PreventionKinesiologyErgonomicsFalls PreventionTribologyHuman Movement MechanicsSlips PreventionBiomechanics Of SlippingFloor Surface FrictionFrictionFriction TestingSlipSlip ResistanceSlip Resistance AssessmentSlip Resistance Testing
Abstract This paper presents results of a study conducted to determine minimum friction levels between the floor and footwear required in cart pushing and pulling to reduce accidents caused by slipping. Experiments involving pushing and pulling a cart were con ducted in the laboratory. Eight subjects with different body weights (ranging from 50 to 80 kg.) were tested for three different hand forces (98, 196 and 294 newton), three different cart handle heights (66, 109 and 152 cm high) and two different moving speeds (1.8 and 3.6 km/hour). A low handle required less friction level (av. 0.3) than a high handle (av. 0.6) in pulling. A high handle required less friction level (av. 0.3) than a low handle (av. 0.7) for all test conditions. The required friction increased significantly as hand force increased. As expected a heavy person exerting a light force (required for the task) and using a slow speed of movement proved to reduce the slip potential.
12
BIOMECHANICS, Its Foundations and Objectives
Ali Erkan Engin · Journal of Biomechanics · 1973 · 564 citations
On accident analysis and slip-resistance measurement
Lennart Strandberg · Ergonomics · 1983 · 147 citations