SPE Annual Technical Conference and Exhibition · 2012 · 194 citations · 8 references
EngineeringEarth SciencesPetroleum EngineeringEnhanced Oil RecoveryPetrophysicsReservoir EngineeringChemical Enhanced Oil RecoveryChemical FloodingCarbonate Rock WettabilityOil Recovery MechanismsResidual Oil RecoveryResidual Oil Saturation ReductionSmart Water FloodingSubsurface Oil RecoveryWater InjectionWater Injection Testing
Abstract In recent years, improved/enhanced oil recovery by tuning the ionic composition of injection water has attracted the attention of the petroleum industry, and currently deemed as new emerging research trend. In view of research results for the last four years, we demonstrated in previous reports (SPE 137634; SPEREE Journal, vol. 14(5), pp. 578-593; SPE 143550, SPE 141082, SPE 154076; SPE 154077) that substantial oil recovery beyond conventional waterflooding from carbonates can be achieved by optimizing the salinity and ionic composition of field injection brine. Similar potential has been confirmed also in the secondary recovery mode. For recovery mechanisms, research confirmed that the driving mechanism is wettability alteration of carbonate rock surface and can be attributed to surface charges alteration, and microscopic dissolution of anhydrite. In this paper, we present the results of two field trials conducted in a carbonate reservoir to demonstrate the SmartWater Flood potential. Both field trials confirmed that in-house research results can be replicated at field scale. Injection of SmartWater revealed a reduction of ~7 saturation units in the residual oil beyond conventional seawater. Considering these field trials are the first-ever applications in carbonate reservoirs, they further provided another confirmation that SmartWater Flood has significant potential to be a new recovery method targeting carbonate reservoirs. A special type of single-well chemical tracer was used in these trials to measure the residual oil in the vicinity of the well following the injection of each water type. During all stages of field trials, careful QA/QC program was put in place to monitor variation in ionic composition in all injected or produced fluids and further insure optimum ionic composition of SmartWater slugs. Several field trials are planned to optimize the current process leading to a multi-well Demonstration Pilot to determine the impact on ultimate recovery and reserves.
8
Single-Well Tracer Method To Measure Residual Oil Saturation
J. F. Tomich, R.L. Dalton, H. A. Deans et al. · Journal of Petroleum Technology · 1973 · 190 citations