Surface Patterning of Metal Substrates Through Low Power Laser Ablation for Enhanced Adhesive Bonding

Marco Alfano, Stefano Pini, Giovanni Chiodo, M. Barberio, A. Pirondi, Franco Furgiuele, R. Groppetti

The Journal of Adhesion · 2014 · 56 citations · 15 references

DOIFull text

Open access

Concepts

Abstract

Abstract The aim of the present work is to study the effect of laser-induced surface patterning on the strength of adhesive joints. Laser ablation was carried out on aluminum alloy (AA6082-T4) and stainless steel (AISI 304) substrates using a pulsed ytterbium fiber laser (LaserPoint YFL 20P). The morphological and elemental modifications induced by the laser ablation were analyzed by means of surface profilometry, scanning electron microscopy (SEM), and X-ray photoelectron spectroscopy (XPS). In addition, surface wettability was analyzed by means of the sessile drop technique. In order to assess the capability of laser ablation to improve mechanical interlocking, cross-sectional areas of the samples taken across the interfacial region were probed under an optical microscope. Finally, mechanical tests were carried out on single-lap shear joints and the fracture surfaces were observed using the SEM. The obtained results showed that low power laser ablation can increase the strength of adhesive joints. KEYWORDS: Adhesion by mechanical interlockingPatterned surfacesSurface treatment ACKNOWLEDGMENTS The authors acknowledge the support of SM S.r.l. (Turin, Italy) and of LaserPoint S.r.l. (Milan, Italy) in the development of the pulsed fiber laser micromachining prototype system used in this study, and Henkel, Industrial Technologies, Milan, Italy for supplying the epoxy adhesive. Notes ND, not detected. Color versions of one or more of the figures in the article can be found online at www.tandfonline.com/gadh.

References

15