Experimental Heat Transfer · 2003 · 67 citations · 15 references
EngineeringMaterials ScienceNuclear EngineeringHeat TransferNuclear MaterialsSurface ScienceBoiling Heat TransferCeramic Nuclear MaterialsCladding MaterialsNuclear Fuel MaterialsSurface OxidationSurface PhysicsFuel Rod PerformanceFuel Rod Thermal ResponseOxidationOxide Thickness ControlOxide Thickness MeasurementRoughness EffectsSubcoolingSurface Roughness Parameters
The effects of surface roughness, oxidation level, and liquid subcooling on the minimum film boiling temperature, T min, during quenching of a nuclear fuel rod were investigated experimentally. An instrumented nuclear fuel rod simulator (FRS) was designed and fabricated with different combinations of cladding (Inconel and Zircaloy) and filler (BN and Al2O3) materials. Surface roughness was varied by polishing the FRS with different grades of emery cloth, whereas oxidation level was varied by heating the FRS in an oven under carefully controlled conditions for different time periods. An eddy-current device was used to nondestructively measure the oxide layer thickness on the FRS. Quenching experiments were conducted in a subcooled water bath and the value of T min was determined from the measured temperature transients. For the FRS explored in the experiments, the minimum film boiling temperature was found to depend strongly on the liquid subcooling, oxidation level, and surface roughness.
15