MIKE: A Double Echelle Spectrograph for the Magellan Telescopes at Las Campanas Observatory

Rebecca A. Bernstein, Stephen A. Shectman, Steven M. Gunnels, S. W. Mochnacki, Alex Athey

Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE · 2003 · 567 citations · 1 references

Concepts

TL;DR

MIKE is a double echelle spectrograph being built for the Magellan Telescopes at Las Campanas Observatory, with commissioning slated for late 2002. This paper presents the optical and mechanical design of MIKE. MIKE simultaneously records 320–1000 nm spectra using blue (320–480 nm) and red (440–1000 nm) channels, each with all‑spherical optics, a single echelle grating in Littrow, double‑pass prism cross‑dispersers, and achieves 19,000–25,000 resolution at a 1″ slit, with a 5″ long slit in standard mode and a fiber‑fed mode for up to 256 objects.

Abstract

The Magellan Inamori Kyocera Echelle (MIKE) is a double echelle spectrograph designed for use at the Magellan Telescopes at Las Campanas Observatory in Chile. It is currently in the final stages of construction and is scheduled for commissioning in the last quarter of 2002. In standard observing mode, the blue (320-480 nm) and red (440-1000 nm) channels are used simultaneously to obtain spectra over the full wavelength range with only a few gaps in wavelength coverage at the reddest orders. Both channels contain a three-group set of all-spherical, standard optical glass and calcium fluoride lenses which function as both camera and collimator in a double pass configuration. A single, standard echelle grating is used on each side and is illuminated close to true Littrow. Prism cross-dispersers are also used double-pass, and provide a minimum separation between orders of 6 arcsec. Spectral resolution is 19,000 and 25,000 on the red and blue sides, respectively, with a 1 arcsec slit. Typical rms image diameter is less than 0.2 arcsec, so that resolution increases linearly with decreasing slit width. The standard observing mode will use a slit up to 5" long, however a fiber-fed mode will also be available using blocking filters to select the desired orders for up to 256 objects at a time. In this paper, we describe the optical and mechanical design of the instrument.

References

1