2014 · 29 citations · 12 references
EngineeringElectrical EngineeringCircuit TheoryMicroelectronicsPower ElectronicsAc-dc ConversionAc-dc ConvertersConverter TopologiesDc-dc ConversionDc-dc ConvertersResonant ConvertersHigh-density Power ConversionHigh-efficiency ConverterLlc Resonant ConvertersPower DensityResonant Dc-dc ConverterResonant Power ConvertersSoft SwitchingSoft-switching Converters
This paper presents a GaN Transistor based 90W ac/dc adapter with a Buck-PFC stage and an isolated Quasi-Switched-Capacitor (QSC) dc/dc stage. In the dc/dc stage, two different QSC converters are proposed. Compared to Flyback and LLC resonant converters, the QSC converters feature: 1) reduced voltage stress on the primary-side switches to 2/3 of the input voltage; 2) reduced voltage stress on the transformer to 1/3 of the input voltage and a lower transformer turns ratio; 3) a wide range for soft-switching operation and high efficiency; 4) a simple control strategy. The operation principles and simulation results are presented. A 90 W, 85 V/19 V, 1 MHz QSC resonant converter is built, using 100 V EPC eGaN FETs for all switches. This prototype achieves: 1) a high power density of 10.5 W/cm <sup xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">3</sup> ; 2) wide-range soft switching and a peak efficiency of 92.8% at 900 kHz in preliminary test results. A Buck-PFC evaluation module from TI is tested with a GaN HEMT and a SiC Schottky diode. The peak efficiency reached 97.1%, and the experimental results are compared with those from the Si based version.
12
High frequency DC-DC converter using GaN device
Johan Delaine, Pierre‐Olivier Jeannin, David Frey et al. · 2012 · 90 citations