Journal of Vacuum Science & Technology B Microelectronics and Nanometer Structures Processing Measurement and Phenomena · 1995 · 53 citations · 0 references
Natural SciencesMaterials EngineeringMaterials ScienceMaterials ChemistryNanomaterialsNanotechnologyMetalsNanowiresQuantum ConfinementQuantum DotsSemiconductor Device MaterialsSemiconductor NanomaterialsAmorphous CarbonElectrical Conductivity MeasurementsEnergy Dispersive X-ray SpectroscopyEnergy-dispersive X-ray SpectroscopyNanocrystalline MaterialsNanocrystalsPrecursor MaterialsQuantum Dot Materials
Electron-beam induced deposition represents a new technology for production of three-dimensional nanoscale structures. The properties of the deposited material are determined by the precursor material as well as the deposition parameters. The deposits of very different organometallic precursor molecules show similar morphologies. The metal content of those deposits is strongly dependent on the beam current and the energy of the primary electrons. Using high beam currents for deposition a polycrystalline material is built up, consisting of single crystallites with diameters of 1–4 nm embedded in an amorphous carbon containing matrix. The distance between the metallic crystallites is in the angstrom range. Thus electrical conductivity of the material is accomplished by tunneling between the nanocrystallites. Wires built up from these materials are able to carry current densities up to 2 MA cm−2. Several materials have been characterized by transmission electron microscopy, energy-dispersive x-ray spectroscopy, and electrical measurements.