Journal of Applied Polymer Science · 2015 · 16 citations · 36 references
Natural SciencesMaterials EngineeringMaterials ScienceBiomaterialsPolymer ChemistryPolymer MaterialsBio-based MaterialsBiomaterial CharacterizationGelsHydrogelsPolymer MembranesPolysaccharide PropertiesBiopolymer MaterialsBiopolymer MembranesBiopolymer-based MembranesGelation KineticsHydrogel MaterialsSorption CapacitySorption Isotherms
ABSTRACT Cryogels based on poly(vinyl alcohol) [PVA] and three types of bioinsertions such as scleroglucan, cellulose microfibers, and zein, respectively, have been prepared using capacity of PVA to crosslink by repeated freezing–thawing cycles. The effect of the incorporation of biopolymers on the properties of PVA cryogel has been studied by using several techniques such as: scanning electron microscopy, differential scanning calorimetry, and Fourier transform infrared studies. The obtained biobased cryogel membranes were subjected to sorption and to diffusion experiments using Crystal Violet (CV), a dye commonly used in the textile industry and in medicine. Image analysis with CIELAB system was used both to monitor the cryogels loading with CV and to gain insight in the dye state into the gel, in correlation with the bioinsertion type and gels morphology. Dye diffusion but also sorption capacity of the cryogels was found to be closely related to the type of biopolymer. In this article the equilibrium (sorption isotherms) and transport properties (diffusion and permeability coefficients) of CV, in/through physical cross‐linked PVA hydrogel membranes with bioinsertions has been reported. The highest efficiency for the CV removal from aqueous solutions was obtained for the PVA/Scl cryogels. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132 , 41838.
36
Crosslinked poly(vinyl alcohol) membranes
B.A. Bolto, Thuy Tran, Manh Hoang et al. · Progress in Polymer Science · 2009 · 656 citations
Bahareh Tanhaei, Ali Ayati, Manu Lahtinen et al. · Chemical Engineering Journal · 2014 · 519 citations
Natural Sciences, Materials Engineering, Materials Science +16