Biomicrofluidics · 2011 · 29 citations · 24 references
EngineeringMaterials EngineeringMaterials ScienceBiosensorsMicrofabricationSensorsMicrobial BiosensorsMicrofabrication MaterialsMicrofabrication ProcessesPathogen DetectionFabricationFabrication TechniquesPore-size DistributionPoresPorositySignal-to-noise RatioWaterborne ContaminationWaterborne Pathogens
Fast detection of waterborne pathogens is important for securing the hygiene of drinking water. Detection of pathogens in water at low concentrations and minute quantities demands rapid and efficient enrichment methods in order to improve the signal-to-noise ratio of bio-sensors. We propose and demonstrate a low cost and rapid method to fabricate a multi-layer polymeric micro-sieve using conventional lithography techniques. The micro-fabricated micro-sieves are made of several layers of SU-8 photoresist using multiple coating and exposure steps and a single developing process. The obtained micro-sieves have good mechanical properties, smooth surfaces, high porosity (≈40%), and narrow pore size distribution (coefficient of variation < 3.33%). Sample loading and back-flushing using the multi-layer micro-sieve resulted in more than 90% recovery of pathogens, which showed improved performance than current commercial filters.
24
Holger Becker · Talanta · 2002 · 1.2K citations
Biocompatibility and biofouling of MEMS drug delivery devices
Gabriela Voskerician, Matthew S. Shive, Rebecca S. Shawgo et al. · Biomaterials · 2003 · 553 citations