Japanese Journal of Applied Physics · 2000 · 28 citations · 4 references
Natural SciencesMaterials EngineeringMaterials ScienceCeramic MaterialsCeramicsThin FilmsCastingDielectricsFerroelectric MaterialsPiezoelectric CeramicsPiezoelectric MaterialsThin-film DepositionFerroelectric PropertiesFerroelectric Thin FilmsFerroelectricityLow-temperature DepositionLow-temperature ProcessingProcess ParametersProcess Parameters OptimizationSol-gel Processing
This paper focuses on a new class of processing for the low-temperature deposition of relatively thick films. We propose a new process of sol-gel casting which involves the dispersion of fine crystalline particles in a sol-gel derived precursor solution followed by casting and annealing at relatively low temperatures. In this study, we describe the basic concepts for optimizing the process parameters. As a result, dense ferroelectric PZT(Pb(Zr 0.53 ,Ti 0.43 )O 3 ) films with thickness up to 9 µm were deposited by up to six coating operations (1.5 µm/one coating operation). The PZT thick film deposited under optimized process parameters exhibited relatively good ferroelectricity (remanent polarization of 12 µC/cm 2 and coercive field of 12 kV/cm) and a good dielectric property (relative permittivity of about 1400).
4
A. C. Young, Ogbemi O. Omatete, Mark A. Janney et al. · Journal of the American Ceramic Society · 1991 · 694 citations
Hisao Suzuki, Mohamed Baijuri Othman, Kenji Murakami et al. · Japanese Journal of Applied Physics · 1996 · 63 citations
Natural Sciences, Materials Engineering, Materials Science +17