Journal of Physics D Applied Physics · 2005 · 37 citations · 24 references
Natural SciencesMaterials EngineeringMaterials ScienceOptical MaterialsOptoelectronicsThin FilmsOptical Thin FilmsOxide SemiconductorsSemiconductor Thin FilmsThin Film AnnealingThin Film Optical PropertiesThin-film MaterialsAnnealingAnnealing EffectsAnnealing Temperature EffectsAnnealing Time EffectsDeposition RateDeposition Rate EffectsIndium Tin Oxide Thin FilmsOptical Properties
Indium tin oxide (ITO) thin films were deposited on glass substrates using the e-beam evaporating technique. The influence of deposition rate and post-deposition annealing on the optical properties of the films was investigated in detail. It is found that the deposition rate and annealing conditions strongly affect the optical properties of the films. The transmittance of films greatly increases with increasing annealing temperature below 300°C but drastically drops at 400°C when they are annealed in forming gas (mixed N2 and H2 gas). An interesting phenomenon observed is that the transmittance of the darkened film can recover under further 400°C annealing in air. Atomic force microscopy, x-ray diffraction and x-ray photoemission spectroscopy were employed to obtain information on the chemical state and crystallization of the films. Analysis of these data suggests that the loss and re-incorporating of oxygen are responsible for the reversible behaviour of the ITO thin films. © 2005 IOP Publishing Ltd.
24
Takao Ishida, Hikaru Kobayashi, Yoshihiro Nakato · Journal of Applied Physics · 1993 · 258 citations
S. Ishibashi, Yoshiyuki Higuchi, Yukihide Ota et al. · Journal of Vacuum Science & Technology A Vacuum Surfaces and Films · 1990 · 166 citations
Natural Sciences, Materials Engineering, Materials Science +17