Enhancing Fracture Conductivity Through Surface Modification of Proppant

Abstract

Society of Petroleum Engineers Abstract A new liquid surface-modification system has been developed for coating proppant, dramatically increasing its surface friction and allowing it to interact instantaneously with surrounding particulates. High surface friction between the coated proppant grains allows them to withstand high flow rate, minimizing their flowback potential after fracture-stimulation treatments. According to field results, when this surface-modification material was used as a flowback-control agent after conventional fracturing treatments, it permitted more aggressive flowback procedures. This treatment did not impair conductivity, and in fact, increased proppant conductivity at closure stresses below 4,000 psi. Better vertical proppant distribution occurred in experiments that demonstrated increased hindered settling of proppant resulting from this surface modification. Fines that already existed within the proppant, fines generated from the formation, or fines derived from crushed proppant upon fracture closure all adhered to the treated proppant, which inhibited them from migrating and blocking the pore throats of the proppant pack. This unique coating technology further enhanced conductivity by improving frac-gel breaker action in certain fluids. This behavior results in faster, more effective well cleanup after stimulation. P. 101