Applied Mechanics and Materials · 2013 · 12 citations · 9 references
Natural SciencesMaterials EngineeringMaterials ScienceMaterials ChemistryNanomaterialsSurface ScienceCoating ProcessesCoating TechnologyCoatingsElectrode MaterialsMetalsSurface CoatingsCrystalline Phase FormationCurrent DensityElectrolyte CompositionNanocoatingsOptimum TemperaturePhase FormationPlatingTemperature Optimum
This study describes how the control of bath pH allows different types of phase formation in the ternary Co-Ni-Fe nanocoating. The acidity of the plating bath has been known as a main factor to the properties of coatings. The Co-Ni-Fe coating was fabricated using a commercial electrodepostion process. Several pH solutions (3, 7 and 9) were employed to determine the optimum condition for Co-Ni-Fe synthesis. The bath pH was varied by using sodium hydroxide (NaOH) and sulphuric acid (H 2 SO 4 ). Other parameters such as temperature, electrolyte composition, deposition time and current density were kept constant. The experiment was performed at 50°C. This temperature is commonly used in the industrial plating process. XRD analysis indicated the presence of both phases: body centred cubic (BCC) and face centred cubic (FCC) dependent on the pH value. Co-Ni-Fe nanocoatings obtained from the electrolyte of low pH showed the fine-grain morphology. The hardness of the Co-Ni-Fe nanocoatings was closely related to the obtained morphology.
9