Microwave and Optical Technology Letters · 2004 · 46 citations · 7 references
EngineeringElectrical EngineeringMaterials ScienceElectromagneticsMicrofabricationMicrowave EngineeringMicrofabrication ProcessesMicrowave AntennasMicrowave Device SimulationMicrowave Integrated CircuitsMicrowave MaterialsMicrowave Transmission LinesCoaxial Transmission LinesInsertion LossInsertion Loss ReductionMicrostrip LinesMicrostrip Transmission LinesPassband Design
Abstract Miniature rectangular coaxial transmission line (with a 300 × 300 μm outer conductor) is simulated, fabricated, and tested up to the Ka band. It is made by the electrochemical fabrication (EFAB™) of nickel such that the center conductor is supported primarily by ≈λ/4 stubs that also establish a resonant passband. The minimum insertion loss of a 1.67‐cm‐long test structure is found to be 1.74 dB at the passband center of 29 GHz. This is within 0.57 dB of the lowest insertion loss predicted by full‐wave numerical simulations, indicative of the high precision and smooth surface morphology of the EFAB process. © 2004 Wiley Periodicals, Inc. Microwave Opt Technol Lett 40: 365–368, 2004; Published online in Wiley InterScience (www.interscience.wiley.com). DOI 10.1002/mop.11383
7
Introduction to Solid State Physics
C. Kittel, D. L. Dexter · American Journal of Physics · 1953 · 13.4K citations
A micromachined high-Q X-band resonator
John Papapolymerou, Jui‐Ching Cheng, J.R. East et al. · IEEE Microwave and Guided Wave Letters · 1997 · 134 citations