Plasma surface modifications for improved biocompatibility of commercial polymers

Abstract

Abstract This report describes work using low pressure gas plasma techniques for the fabrication of surfaces designed for compatibility with biological tissue and fluids. The smoothness of the surfaces was investigated using scanning tunnelling microscopy (STM) and the wettability was assessed by measurement of air/water contact angles. Plasma surface treatment rendered fluorocarbon polymers wettable by polar liquids, but the wettability decreased with time during storage of the samples in air. Plasma polymerization, on the other hand, allowed the deposition of thin coatings which were more stable with time. STM of plasma polymers, which were coated with a sputtered film of platinum or gold, showed that these coatings were smooth and continuous. The attachment and growth of human umbilical artery endothelial cells was used to assess the biocompatibility of several plasma polymer surfaces. There was some correlation between the ability of a surface to grow cells and the wettability of that surface with polar liquids, but significant differences in cell growth on surfaces with very similar hydrophilicity indicated that other factors are at least as important.