Journal of Materials Chemistry · 1997 · 47 citations · 23 references
Natural SciencesMaterials EngineeringMaterials ScienceElectrochemistryMaterials ChemistryThin FilmsChemical Vapor DepositionElectrochemical CellsElectrode MaterialsThin Film Electrical PropertiesThin-film MaterialsTransparent Conducting OxidesActivation EnergyElectrochemical ConductivityElectrochemical ConversionElectrochemical ProcessesElectrochemical Surface EngineeringElectrochemical Surface ReactionsThin Oxide FilmsTin Oxides
SnO 2 films have been succesfully prepared by chemical vapour deposition (CVD) by reaction of SnCl 2 with O 2 and a value of the activation energy of 58 kJ mol -1 has been measured. The temperature range 450–500 °C has been found to be the optimum for the reaction with resistivities of the films of 9×10 -4 Ω cm on silicon and 6×10 -4 Ω cm on Pyrex. These two values are the lowest reported so far for SnO 2 films which have not been deliberately doped. For their use as transparent conducting films, a figure of merit of 9.87×10 -3 □ Ω -1 was found for a 0.8 µm thick film; this is also the highest reported so far. Characterization of the films by XRD showed a preferred [200] orientation and the grain size obtained from the XRD and SEM micrographs was in excess of 0.4 µm. The SnO 2 films, when tested in an eletrochemical cell, were unstable. A surface electrochemical process has been suggested for the disintegration.
23
New figure of merit for transparent conductors
G. Haacke · Journal of Applied Physics · 1976 · 2.1K citations
Natural Sciences, Materials Engineering, Materials Science +17
Peter C. Foller, Charles W. Tobias · Journal of The Electrochemical Society · 1982 · 136 citations