X-ray phase imaging with a paper analyzer

Kaye S. Morgan, David M. Paganin, Karen K. W. Siu

Applied Physics Letters · 2012 · 278 citations · 28 references

Concepts

TL;DR

The paper proposes a simple x‑ray phase imaging technique that uses sample‑induced distortion of a high‑contrast random pattern to retrieve the 2‑D phase map at the sample exit surface. The method employs a sandpaper sheet to generate a reference random pattern, records the distorted pattern after the sample, and via correlation analysis of a single sample‑plus‑sandpaper image against a sandpaper‑only reference, produces differential phase contrast images that are integrated to recover the projected phase depth. The approach requires only a single sample image, preserves flux, and offers a simple setup, making it useful for imaging dynamic processes with both synchrotron and laboratory x‑ray sources.

Abstract

We present a simple x-ray phase imaging method that utilizes the sample-induced distortion of a high contrast random intensity pattern to quantitatively retrieve the two-dimensional phase map at the exit surface of a coherently illuminated sample. This reference pattern is created by placing a sheet of sandpaper in the x-ray beam, with the sample-induced distortion observed after propagation to the detector, a meter downstream. Correlation analysis comparing a single “sample and sandpaper” image to a reference “sandpaper only” image produces two sensitive differential phase contrast images, giving the sample phase gradient in vertical and horizontal directions. These images are then integrated to recover the projected phase depth of the sample. The simple experimental set-up, retention of flux, and the need for only a single sample image per reconstruction suggest that this method is of value in imaging a range of dynamic processes at both synchrotron and laboratory x-ray sources.

References

28