Journal of Vacuum Science and Technology · 1975 · 13 citations · 0 references
Natural SciencesElectrical EngineeringPhysicsPlasma PhysicsRadiation PhysicsRadiation TransportLow-temperature PlasmasPlasma SourcesPlasma Surface TreatmentIon Beam EtchingIon Source DesignIon SourcesRadiation DamageSputteringSputtering ProcessesSubstrate Temperature EffectsTrenching
The concept of backsputter or ion-etch pattern definition is considered. This includes a discussion of ion sources and basic problems encountered in this type of definition. Two types of ion bombardmant are considered which include conventional sputtering systems and ion guns. Five major problem areas in backsputter definition are considered: (i) relative removal rates of mask and pattern films; (ii) secondary mask defects; (iii) redeposition effects; (iv) substrate temperature; and (v) radiation damage. The principles of backsputter definition are then developed. This includes a discussion of sputter yield vs angle of incidence, forward ion scattering effects which result in the trenching phenomenon, redeposition effects, and reactive backsputtering. It was concluded from this analysis that an ion-beam approach with substrate tilt and rotation relative to the ion beam is the optimum configuration for backsputter definition. The design of a low-voltage triode backsputtering system (LVBS) is discussed which is capable of generating low- energy (∠200 eV), high-current-density (1–5 mA/cm2), and large-diameter [in excess of 12 in. (30.48 cm)] ion beams. This system eliminates many of the usual problems associated with conventional sputtering systems and is readily adapted to large-scale manufacturing requirements. A characterization of the system is presented which includes measurements of: (i) plasma and beam properties; (ii) substrate temperatures as a function of beam potential and current density; (iii) film removal rates; (iv) application to pattern definition; and (v) application to device processing.