SPE Annual Technical Conference and Exhibition · 1984 · 240 citations · 19 references
EngineeringMaterials ScienceFluid DynamicsMultiscale ModelingTransport PhenomenaBoundary-layer TheoryFlow ModelingSurface RoughnessSurface Roughness EffectsCapillary FlowCapillary NumberCapillary PhenomenaInvasion PercolationPercolationPercolation In Porous MediaRoughness EffectsWetting
ABSTRACT The displacement of one fluid by another in a two-dimensional etched network has been described at the microscopic level: during imbibition, the wetting fluid can flow through the roughness of surfaces, along the edges of the ducts (rectangular cross-section) or in the bulk of the ducts. In this paper, we present results for the time scales of these different mechanisms and the consequences for imbibition in large 2-dimensional networks of capillaries and approximate laws for the flow rates by roughness and corners are calculated in an infinitely long square duct. A theoretical model is built for describing the relationship between the fluid configuration and the Capillary Number (or flow rate): VERY LOW FLOW RATE: The wetting fluid can reach all the parts of the network by flowing along the surface roughness. It begins to fill the bulk of the smallest ducts and the number of filled ducts increases with time. This is a Cluster growth mechanism. LOW FLOW RATE: The wetting fluid can flow along the corners of the ducts but not through the roughness. The mechanism is like Invasion Percolation but the wetting phase flows along the grains of the solid in a special network called: DUAL network. HIGH FLOW RATE: The wetting fluid only flows in the bulk of the ducts and the mechanism is a Frontal Drive without fingers nor trapping of the nonwetting phase.
19
Capillary displacement and percolation in porous media
Richard Chandler, Joel Koplik, Kenneth Lerman et al. · Journal of Fluid Mechanics · 1982 · 483 citations
Engineering, Physics, Fluid Dynamics +15