AIAA Journal · 1997 · 42 citations · 14 references
EngineeringAerospace EngineeringPhysicsAerodynamicsAeroelasticityComputational Fluid DynamicsBoundary-layer DynamicsHypersonic AerodynamicsShock WavesBoundary Layer InstabilityBoundary Layer StabilityHarmonic GenerationHypersonic Boundary LayersHypersonic FlowHypersonic StabilityInstability MechanismsNonlinear Effects
An experimental study in a low‑disturbance Mach‑6 facility used hot‑wire anemometry to identify boundary‑layer instability mechanisms that drive transition on a cone model at varying angles of attack. Results show that increasing angle of attack stabilizes the windward boundary layer and destabilizes the leeward side, with the second‑mode transition dominating at zero degrees but being suppressed on the windward side, while the leeward side exhibits higher‑frequency instabilities and nonlinear effects such as saturation, harmonic generation, and spectral broadening.
An experimental investigation of the effects of angle of attack on hypersonic boundary-layer stability on a ared-cone model was conducted in the low-disturbance Mach-6 Nozzle-Test-Chamber Facility at NASA Langley Research Center. Hot-wire anemometry diagnostics were applied to identify the boundary-layer instability mechanisms that lead to transition. The present results show that the boundary layer becomes more stable on the windward ray and less stable on the leeward ray relative to the zero-degree angle-of-attackcase. The second-mode instability dominates the transition process at a 0-deg angle of attack; however, on the windward meridian at an angle of attack this mode was stabilized. On the leeward meridian the frequency of the dominant instability was higher than the estimated frequency of the second-mode disturbance; thus the dominant transition mechanism may be other than a second-modedisturbance. Nonlinear effects, such as growth saturation, harmonic generation, and spectral broadening, were observed in the transitional and turbulent ow regimes.
14