Excimer Laser Surface Treatment of Sheet Molding Compound for Adhesive Bonding

J. K. Park, K. Mukherjee

Materials and Manufacturing Processes · 1998 · 17 citations · 5 references

Concepts

Abstract

Abstract High-strength adhesive bonding of polymer composites can be achieved by treating surface with an excimer laser. A sheet molding compound (SMC) was used for the laser surface treatment for adhesive bonding. By subjecting the SMC surface to excimer laser source, the epoxy matrix was selectively removed by ablation, where upon the glass fibers stood exposed, without any inherent damage to their surface. The controllability is proved to be admirable by optimizing processing parameters. A significant improvement of the joint strength was found in the excimer laser treatment. The selective ablation of polymer matrix resulted in a maximized surface roughness, and an interlocking effect: of glass fibers at the joints. It is also possible that capillary effect draws the adhesive between the mating surfaces. This investigation shows that a high quality adhesive joint of polymer composites can be obtained from the excimer laser treatment.

References

5