Interfacial roughness correlation in multilayer films: Influence of total film and individual layer thicknesses

D. E. Savage, N. Schimke, Y. H. Phang, M. G. Lagally

Journal of Applied Physics · 1992 · 105 citations · 15 references

Concepts

TL;DR

The study examined W/C multilayer films on Si(100) with total thicknesses of 400–6400 Å and bilayer periods of 20–160 Å to investigate how interfacial roughness and its correlation vary with film thickness and period. The films were characterized by x‑ray diffractometry, with average interfacial roughness obtained from conventional (θ,2θ) scans and roughness correlation extracted from rocking‑curve (transverse‑profile) analysis. The roughness magnitude depends more on bilayer period than on total film thickness, suggesting that interfaces retard surface roughness evolution and that thin restarting layers can be used to control thin‑film growth morphology.

Abstract

A series of W/C multilayer films sputter deposited on Si(100) substrates with total thickness ranging from 400 to 6400 Å and bilayer period from 20 to 160 Å were examined to explore the variation of interfacial roughness and interfacial roughness correlation with film thickness and period. The films were characterized with x-ray diffractometry. Average interfacial roughness is obtained from conventional (θ,2θ) scans, while information on roughness correlation is extracted from rocking-curve (transverse-profile) analysis. The magnitude of the roughness is found to depend more on bilayer period than on total film thickness. The observations suggest that interfaces retard the evolution of surface roughness and that thin ‘‘restarting’’ layers may be used to control the growth morphology of thin films.

References

15