Journal of Engineering for Industry · 1988 · 57 citations · 0 references
EngineeringManufacturing EngineeringMechanical EngineeringHeat TransferMetrologyThermal AnalysisIndustrial InstrumentationIndustrial MetrologyMachiningTemperature MeasurementTemperature MetrologyTemperature SensorsCutting Tool WearMachine Tool MetrologyResponse TimeThermocouple MeasurementThermocouple ThermometryTool WearTool Wear PredictionTurning
This research has been concerned with the measurement of on-line temperature in a turning operation. The goal has been to develop a measurement sensor and algorithms that allow tool-chip interface temperatures to be estimated during machining. The measuring scheme relies on the signal from a standard thermocouple, located at the bottom of the tool insert, the response time of which has been observed to be on the order of one second. The important feature of the prediction scheme is that it can also estimate the interface temperatures for an interrupted cut and for the case when tool wear is present. The estimated interface temperatures have been compared with those obtained with a previously described metallographic technique [1] and a difference of 5–13 percent between these two results has been reported.