SPE Drilling Engineering · 1988 · 63 citations · 3 references
EngineeringCivil EngineeringPetroleum EngineeringDrillingDrilling EngineeringVibrationDrilling HydraulicsDrilling MechanicsDrilling OperationsBottom Hole Assembly DynamicsBottomhole Assembly DynamicsDrilling Vibration AnalysisDrilling VibrationsDrillstring DynamicsDrillstring MechanicsExcitationVibration Data Analysis
Summary This paper presents a study of important excitation mechanisms and resonances that cause bottomhole assembly (BHA) vibrations during drilling operations. The study is based on dynamic vibration data gathered in a test well with our Advanced Drillstring Analysis and Measurement System (ADAMS) surface measurement system. The data were gathered while three different BHA's were used to drill portions of this well to 800 ft [244 m]. A case study for a large-diameter hole in an actual field well is also presented. The data showed many velocity-dependent excitation mechanisms, including 1×ω, 2×ω, 3×ω, a drillstring walk mechanism, and drillstring whipping mechanisms that were dependent on the drillstring and hole geometries. The data also show important resonances that may be excited, including resonances with strong local contributions, and axial and torsional resonances. When the excitation mechanisms match these resonances, damaging vibrations can be induced. This study identifies the presence of more fundamental excitation mechanisms than the l×ω and 3×ω mechanisms. These should be used in models that predict drillstring and BHA vibrations. The study also shows important resonances that should be considered when BHA vibrations are predicted.
3