Key engineering materials · 2009 · 79 citations · 7 references
Natural SciencesMaterials EngineeringMaterials ScienceMechanical Behavior Of MaterialsMetallic MaterialsMetallurgyAlloysGrain GrowthSteel MaterialsStrain HardeningStress-strain BehaviorWork HardeningDeformation In SteelsHall-petch RelationshipRecrystallizationRecrystallization In SteelsSteelsStress-strain CurveTensile DeformationYield Stress
The grain size dependence of the tensile properties of a TWIP steel has been determined for a wide range of grain sizes obtained by grain growth after complete recrystallization of cold rolled material. The near-linear stress-strain behaviour typical of either TWIP steels or other materials that deform by twinning has been observed, the work hardening rate being larger for the smaller grain sizes. The Hall-Petch slope increases as a function of strain, from 350 MPa μm1/2 for the yield stress to 630 MPa μm1/2 for the maximum uniform strain in the tensile tests, ε 0.40. Profuse twinning is observed in deformed specimens by means of FIB-ISE.
7
The development of a new Fe-Mn-C austenitic steel for automotive applications
Colin Scott, S. Allain, M. Faral et al. · Revue de Métallurgie · 2006 · 190 citations