IEEE Transactions on Magnetics · 2013 · 29 citations · 15 references
Natural SciencesElectrical EngineeringMaterials ScienceMagnetic MaterialsMicroelectronicsThin FilmsFerromagnetic MaterialsMagnetic Thin FilmsMicrowave MaterialsThin Film Electrical PropertiesThin Film Magnetic PropertiesInductor DesignInductorsLaminated FilmsMetallic Thin FilmsThin Film FerromagnetsThin-film Magnetic Materials
In this work, we report the improvement of high frequency response and quality factor of on-chip inductors by integrating ferromagnetic thin films (Co-Zr-Ta-B) including two different combinations of laminations and 500 nm thick non-laminated film. Up to 4.2X increase in inductance and 5X increase in quality factor (Q) was obtained from 4-turn spiral inductors incorporated with 50 nm by 10 laminated films with a peak Q at 500 MHz. Effects of patterning magnetic film have also been investigated by changing magnetic thin film aspect ratio. It was demonstrated that the peak Q can be pushed towards using higher frequencies as high as 1 GHz by a combination of patterning magnetic films into fine bars and laminations.
15
Review of On-Chip Inductor Structures With Magnetic Films
Donald S. Gardner, G. Schrom, Fabrice Paillet et al. · IEEE Transactions on Magnetics · 2009 · 332 citations
Integrated on-chip inductors using magnetic material (invited)
Donald S. Gardner, G. Schrom, P. Hazucha et al. · Journal of Applied Physics · 2008 · 115 citations
Natural Sciences, Electrical Engineering, Materials Science +17