Journal of Applied Physics · 1991 · 17 citations · 7 references
Mineral PhysicOptical MaterialsEngineeringOptical TestingMetallic NanomaterialsOptical CharacterizationSpectroscopic Propertyλ=10.6 μMOptical PropertiesSolidificationMaterials SciencePhysicsAmorphous MetalDrude ModelSurface CharacterizationRoom TemperatureNatural SciencesSpectroscopyMaterials CharacterizationApplied PhysicsSurface ScienceSurface AnalysisMolten GoldClean Solid SurfaceOptical Constants
The index of refraction, the extinction coefficient, and the absorptance for gold and tin were measured in a temperature range from room temperature up to the melting point for the wavelength λ=10.6 μm. All measurements were performed under ultrahigh-vacuum conditions using a photometric infrared ellipsometer with a rotating analyzer. Measurements verify a discontinuous jump of the absorptance at the solid-to-liquid phase transition from 3.5 to 6.5% in the case of gold and from 4.9 to 9.2% in the case of tin. The experimental results derived for the clean solid surface are in good agreement with the theoretical prediction by a Drude model, if additionally appropriate effective masses and the anomalous skin effect are taken into account. This theory is much less accurate if applied to the molten state of gold and tin, as was already shown previously for liquid aluminum and copper.
7
Reflectivity of metals at high temperatures
Kikuo Ujihara · IEEE Journal of Quantum Electronics · 1972 · 245 citations
Optical properties of liquid metals at high temperatures
Jane C. Miller · Philosophical magazine · 1969 · 154 citations
The optical properties of liquid metals
N. R. Comins · Philosophical magazine · 1972 · 119 citations