Fe-Mg lattice diffusion in olivine

D. K. Buening, Peter R. Buseck

Journal of Geophysical Research Atmospheres · 1973 · 366 citations · 18 references

Concepts

Abstract

The Fe-Mg interdiffusion coefficients D and activation energies for interdiffusion in single crystals of San Carlos olivine have been measured as functions of Fe/(Fe + Mg), temperature, pO2, and crystallographic direction. The interdiffusion coefficients show a positive correlation with temperature, Fe concentration, and pO2. In all cases D is greatest along the c crystallographic axis and least along b. Examples of equations describing diffusion along c (for 10 wt % Fe, pO2 = 10−12 atm) are Dc = 1.74 × 10−2 cm2/sec [exp -(2.52 ev/kT)] (for T > ∼1125°C) and Dc = 3.71 × 10−7 cm2/sec [exp -(1.25 ev/kT)] (for T < ∼1125°C). The interdiffusion coefficients are proportional to pO2(0.172) with an accuracy in the exponent of ±0.022. Since the theoretical value based on the simple vacancy mechanism is pO2(0.166), these results strongly suggest that Fe3+ and associated vacancies play an important part in the diffusion process. The calculated activation energies are proportional to mole percent forsterite and range from 0.77 to 1.91 ev below approximately 1125°C and from 2.02 to 2.9 ev at higher temperatures. Intrinsic-extrinsic diffusion effects and grain boundary and compaction effects introduced by the use of fayalite powder in the diffusion system may account for the observed change in activation energies. The results of these experiments will help in explaining olivine diffusion mechanisms, interpreting zoning in olivines, determining cooling rates of olivine-bearing rocks, and studying the influence of Fe-Mg interdiffusion in olivine on creep flow rates in the mantle.

References

18