Optics Express · 2005 · 69 citations · 1 references
EngineeringElectrical EngineeringMaterials SciencePhotonicsSensorsSpectroscopyFiber OpticsLaser SpectroscopyOptical FibersOptical SpectroscopyStrain MeasurementStrain SensorsDynamic Strain SensingFiber Bragg GratingsFrequency DriftMechanical Stress ResponseMolecular Absorption LinesOptical Fiber Strain SensingOptical Fiber Strain SensorsStrain Sensing
We demonstrate the possibility of using radio-frequency modulation spectroscopic techniques for interrogation of fiber Bragg-grating (FBG) structures. Sidebands at 2 GHz are superimposed onto the output spectrum of a 1560-nm DFB diode laser. The power reflected by an FBG is demodulated at multiples of the sideband frequency. The sideband-to-carrier beat signal is shown to be extremely sensitive to Bragg wavelength shifts due to mechanical stress. Using this method, both static and dynamic strain measurements can be performed, with a noise-equivalent sensitivity of the order of 150 nepsilon/ radicalHz, in the quasi-static domain (2 Hz), and 1.6 nepsilon/ radicalHz at higher frequencies (1 kHz). The measured frequency response is presently limited at 20 kHz only by the test device bandwidth. A long-term reproducibility in strain measurements within 100 nepsilon is estimated from laser frequency drift referred to molecular absorption lines.
1
In-fibre Bragg grating sensors
Yun-Jiang Rao · Measurement Science and Technology · 1997 · 1.6K citations