IEEE Transactions on Geoscience and Remote Sensing · 2014 · 134 citations · 33 references
EngineeringElectrical EngineeringAntennasBiomedical ImagingWireless CommunicationsDiversity TechniquesMimo AntennasModulationRadar AntennasRadar Signal ProcessingRadar SystemsHigh-resolution ImagingMimo RadarMimo SystemsOrthogonal Frequency-division MultiplexingRadar ImagingRange ResolutionSynthetic Aperture RadarSynthetic Aperture Radar Imaging
Multiple-input multiple-output (MIMO) synthetic aperture radar (SAR) has received much attention due to its interesting application potentials, but effective waveform diversity design is still a technical challenge. In a MIMO SAR, each antenna should transmit a unique waveform, orthogonal to the waveforms transmitted by other antennas. The waveforms should have a large time-bandwidth product, low cross-correlation interferences, and a low peak-average ratio. To reach these aims, this paper proposes an orthogonal frequency division multiplexing (OFDM) chirp waveform with random matrix modulation. The designed waveforms are time-delay and frequency-shift decorrelated. Referring to MIMO SAR high-resolution imaging, the proposed OFDM chirp waveform parameters are optimally designed, and their performances are analyzed through the ambiguity function and range-Doppler-based MIMO SAR imaging algorithm. Extensive and comparative simulation results show that the waveforms have the superiorities of high range resolution, constant time domain and almost constant frequency-domain modulus, large time-bandwidth product, low peak-average ratio, and low time-delay and frequency-shift correlation peaks. More importantly, this scheme can easily generate over three orthogonal waveforms with a large time-bandwidth product.
33